Downloads

Custom Gear dependent Map for the follwoing setup: 2009/2010+ Yamaha/Star VMax Akrapovic Midpipe and mufflers Monster Big Air TopSpeed EXUP Eliminator AIS blocked off IMPORTANT: Gear dependent map requires that the speed signal (prior to TopSPeed unit) is hooked up to the PCV and the gears are calibrated to the PCV. IMPORTANT: TPS Signal needs to be properly calibrated to the PCV. The only clesan way to do so is on a dyno. At least 0% throttle is very important. Full throttle is less. Calibrate 0% throttle only after a full warm up and the bike running for a minimum of 5 min to avoid incorrect calibration. This map is the one that was used to dyno the Akrapovic exhaust system, toping at over 196rwhps (w/ 200 series tire). Compliments fxTuner LLC