Anybody know if stock mufflers with fit onto the Akrapovic collector?
Easy bolt on?
thanks,
ride safe,
vegas tom

Vrodtom, I'm told yes, as I've asked the same question. The 2 things you need is a allen head swivel extention for removal. And a PCV if you want to utilize your investment and keep the bike running right I Hope this helps, I'm sure there's more coming. Mark

Yes - the mufflers will fit.

BUT - the heat shields need to be slightly modified. Nothing major, but a little extra work.

Hope this helps!

so I will be able to use the stock heat shields? I want the look of stock. Tks FX

The right side heat shield is fine. You will have to cut down the rear end of the left side shield.

Here is a pic showing what needs to be trimmed off the heatshield with the Akrapovic pipes. Courtesy of Exactrep website

Tom, They work great with the Akro midpipe! Slide the mufflers on and "try" to attach the shield and you can see what needs to be trimmed. Use a good quality pair of tin snips to make the cut and you'll be good to go! They sound good and look "stock". Best of both worlds! Good luck, Chuck

Thanks, you guys are great!

Badger1670 wrote:
Bob, I'm glad you posted this picture up. I've looked at this before and didn't realize that the cutout was penciled in---Thanks Chuck. This is my next project, Mark P.S. Bob, The wait has got me in suspenders !!!

Marks9222 wrote:


That's a vision I could have done without