Has any installed a nitrous kit on the new MAX?

Our Fearless leader Oliver did for the dragfest in California there are some posts on it year or two go

you might search nitrous in the search box but i am sure their is someone that remembers or was there

and what the times were i bet Bob (no max) would know.

Yes, people have run a dry shot on the Vmax. Olivers (fxstein's bike) ran 8.99 without wheelie bar using NOS..

30 shot is good, 60-80 would be the most I would go & that would have to be setup VERY carefully..

An appropriate flash would also be beneficial (1.47 60ft. time)





Dale Walker ran a 9 flat with a dry shot also..

any idea what system they used?

A basic fogger system is simple to set up,, This guy has most of the parts you need for under $200..



You can buy a more serious kit that's direct port with tuneable jets for more or less HP, but it costs to do that..

TB, used to have one 4sale..Don't know if he still has it..

Tim, do you one one 4sale? Somebody needs one..

Thanks for the notes. Ran a 10.34 last night. Thinking I need a little juice to get speeds up!

Congrats! Don't know what you weigh, but more seat time will help. Nitrous is the cheapest per hp add on you'll find tho

Mods? and more about u?

I'm 230+lbs with bike..900lbs

My best is a 10.2 with my best 60' of 1.64 @ the 1/8 mile..I've yet to do that 60' @ the 1/4mil track tho..If i did i would REAL close to a 9sec. run, but that's yet to be seen..

Good luck!

I ran a 150 wet shot on a '99 Z/28 I used to have... modded to 450 HP on motor alone. With the 150 shot, it hit 630ish HP, and around 725 TQ. More shocking than the 150 HP increase was the 300+ft lbs of torque I got out of it. On cars at least, nitrous adds huge torque... I'd guess that holds true on cycles as well? It'd be interesting to see some dyno graphs if anyone has any.