Yamaha Star V-Max Forum :: Topic: Double D clutch spring. (26/28)

Welcome, Guest

Disclaimer: Any modification made to your motorcycle can potentially void your factory warranty and conflict with local and federal laws. Any such changes should be performed by an experienced and licensed mechanic.
The descriptions provided in here are for entertainment purposes only. www.starVmax.com does not endorse nor recommend do-it-yourself modifications.
Use your own judgement and check with local authorities (e.g. DMV) to determine if you are allowed and capable to perform such tasks. www.starVmax.com cannot be held responsible for any incidents or injuries as a result of any modifications described here.

Page:
1
...
24
25
26
27
28

TOPIC: Double D clutch spring.

Re: Double D clutch spring. 11 months 3 weeks ago #251

Hrmmm..	No_Max NOW ONLINE Platinum Max Posts: 2637 Thank you received: 2064
Lean & Mean it in every corner of your life... If it wasn't for us the fast lane would rust... V4'S are music to the seat of my pants... Get your V-Max ECU Re-Flashed to Full Power! The administrator has disabled public write access.

Re: Double D clutch spring. 11 months 3 weeks ago #252

I am installing Rick52s clutch retainer and a pressure plate and I need to know what is the torque for the 6 bolts for the pressure plate and the torque for the 8 bolts for the cover. I thought someone said that the cover was 8ftlbs and the pressure plate was 5ftlbs. I can't remember. Thanks Dannie	Dannie NOW ONLINE Senior Max Posts: 380 Thank you received: 119
The administrator has disabled public write access.

Re: Double D clutch spring. 11 months 3 weeks ago #253

Dannie wrote: I am installing Rick52s clutch retainer and a pressure plate and I need to know what is the torque for the 6 bolts for the pressure plate and the torque for the 8 bolts for the cover. I thought someone said that the cover was 8ftlbs and the pressure plate was 5ftlbs. I can't remember. Thanks Dannie Pages 321 - 322. dl.dropbox.com/u/579108/09vmax.pdf	itgoes NOW ONLINE Platinum Max Posts: 4892 Thank you received: 2353
Mark B "The Future Is Unwritten" The administrator has disabled public write access.

Re: Double D clutch spring. 11 months 3 weeks ago #254

Pressure Plate is 8 Nm, Cover Bolts are 12 Nm. Take a Look at this Thread, start from # 6 in the List and work it up until # 10. The Rest isn't interesting for you while upgrading the Retainer Ring. www.starvmax.com/forum/technical-vmax/16...t=10&start=40#162296	Squeeze NOW ONLINE Platinum Max Posts: 2483 Thank you received: 456
Last Edit: 11 months 3 weeks ago by Squeeze. The administrator has disabled public write access.

Re: Double D clutch spring. 11 months 3 weeks ago #255

I should have come inside and looked at the web page to see if I had any updates. I tighten all the bolts up to 5.2ftlbs. I then drove down the road a couple of times. Clutch engages sooner a little stiffer not much but you can tell it. I am going to have to go back and get the torque wrench again and go back in and retighten them up to 8nm. And 12 on the out side. When I took them off on the outer plate they were not tight at all. Thanks for the correct #'s Dannie

Dannie
NOW ONLINE
Senior Max
Posts: 380
Thank you received: 119

The administrator has disabled public write access.

Re: Double D clutch spring. 11 months 2 weeks ago #256

Don't forget to push the Push Rod in two or three Times.	Squeeze NOW ONLINE Platinum Max Posts: 2483 Thank you received: 456
The administrator has disabled public write access.

Re: Double D clutch spring. 11 months 2 weeks ago #257

Squeeze what is the push rod. are u talkin about pullin the clutch in.	Dannie NOW ONLINE Senior Max Posts: 380 Thank you received: 119
The administrator has disabled public write access.

Re: Double D clutch spring. 11 months 2 weeks ago #258

I rode the bike some more and notice that the clutch seems to not get harder to pull but when I pull it, it seems like it don't want to pull in as much as when I first started to ride it. It feels like the pressure is building up in it. What are the #'s for on the clutch lever for. Mine is at 1, should I move it to 2,3,or 4. THanks Dannie	Dannie NOW ONLINE Senior Max Posts: 380 Thank you received: 119
The administrator has disabled public write access.

Re: Double D clutch spring. 11 months 2 weeks ago #259

That's up to you.. Everybody likes a certain amount of travel in their levers. Dial it where you want it	No_Max NOW ONLINE Platinum Max Posts: 2637 Thank you received: 2064
Lean & Mean it in every corner of your life... If it wasn't for us the fast lane would rust... V4'S are music to the seat of my pants... Get your V-Max ECU Re-Flashed to Full Power! The administrator has disabled public write access.

Re: Double D clutch spring. 11 months 2 weeks ago #260

No_Max should it feel like it is building up pressure or is that just my imagination. I have rode it about 12miles if anything was going to happen would it already have happen. I mean problem wise.	Dannie NOW ONLINE Senior Max Posts: 380 Thank you received: 119
The administrator has disabled public write access.

Page:
1
...
24
25
26
27
28

Forum

VMax Forums

Installed VMax Modifications and Accessories

Double D clutch spring.

Time to create page: 0.102 seconds