Wednesday May 22 , 2013
Text Size
   
Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username? Create an account
Disclaimer: Any modification made to your motorcycle can potentially void your factory warranty and conflict with local and federal laws. Any such changes should be performed by an experienced and licensed mechanic.
The descriptions provided in here are for entertainment purposes only. www.starVmax.com does not endorse nor recommend do-it-yourself modifications.
Use your own judgement and check with local authorities (e.g. DMV) to determine if you are allowed and capable to perform such tasks. www.starVmax.com cannot be held responsible for any incidents or injuries as a result of any modifications described here.
  • Page:
  • 1

TOPIC: Dynojet quickshifter instal lquestion/instructions

Dynojet quickshifter instal lquestion/instructions 2 years 1 day ago #1

Ok, I just purchased a quickshifter from a member and did not get the install instructions.
My only big question, is for where to have the slider shaft? Is there a measurement you all have that is universal to the V Max?
I was told to set the software for 65 milsecs do you all agree with that?

I am going to Barona track tomorrow and want to have it all set up and see what I can do there with it installed.

Thanks for any assistance.

"Go fast, or go home!"

Ron
  • roninmn29
  • roninmn29's Avatar
  • OFFLINE
  • Senior Max
  • FastMax2009
  • Posts: 252
  • Thank you received: 100
The administrator has disabled public write access.

Re: Dynojet quickshifter instal lquestion/instructions 2 years 1 day ago #2

I set mine at 85 ms for 1-2 Gear, 75 ms for 2-3, 70 ms for the others

Mounting Instructions ... take a Look at the Pic here, might look familiar ... www.powercommander.com/powercommander/Pr...r_quick_shifter.aspx
  • Squeeze
  • Squeeze's Avatar
  • NOW ONLINE
  • Platinum Max
  • Posts: 2473
  • Thank you received: 446
The administrator has disabled public write access.

Re: Dynojet quickshifter instal lquestion/instructions 2 years 1 day ago #3

Good luck to you at Barona.
  • Remaxed
  • Remaxed's Avatar
  • OFFLINE
  • Platinum Max
  • Posts: 2468
  • Thank you received: 1121
Don't sweat the small stuff... it aint worth it! lol
The administrator has disabled public write access.

Re: Dynojet quickshifter instal lquestion/instructions 2 years 1 day ago #4

Tip set the linkage high cause all you have to do is bump it and you are shifting I used to keep my toe on the shifter and had to run mine up I set mine at 6 K to shift I have the Evolouzone one but same thing really

Take some video/ pics at the strip and post up your times

Good luck BTW are you flashed?
  • capt bob
  • capt bob's Avatar
  • OFFLINE
  • Platinum Max
  • Posts: 4079
  • Thank you received: 1718
The administrator has disabled public write access.

Re: Dynojet quickshifter instal lquestion/instructions 2 years 1 day ago #5

Here is a picture that I got right from the Dynojet website.

Squeeze's recommendation is correct, a little longer kill time will work better. I'm running at 75µs.

Capt. Bob is also right that you should adjust the shifter up a little. If you have pressure on the lever the switch will be made and it will not work correctly.


new_quick_shifter_on_bike.jpg
  • itgoes
  • itgoes's Avatar
  • OFFLINE
  • Platinum Max
  • Posts: 4881
  • Thank you received: 2336
Mark B

"The Future Is Unwritten"
The administrator has disabled public write access.

Re: Dynojet quickshifter instal lquestion/instructions 2 years 22 hours ago #6

I have mine set to 65mil and it works perfect, easy on the tranny and quick on the track. Inop until 6k.
I guess it's a personal preference thing.
  • Dinan
  • Dinan's Avatar
  • OFFLINE
  • Expert Max
  • Posts: 821
  • Thank you received: 260
The administrator has disabled public write access.
  • Page:
  • 1
Time to create page: 0.098 seconds

My Account

Sign in with Facebook