Recent Topics The latest Discussions
New Topic Start a new discussion
|
Welcome,
Guest
|
Disclaimer: Any modification made to your motorcycle can potentially void your factory warranty and conflict with local and federal laws. Any such changes should be performed by an experienced and licensed mechanic.
The descriptions provided in here are for entertainment purposes only. www.starVmax.com does not endorse nor recommend do-it-yourself modifications.
Use your own judgement and check with local authorities (e.g. DMV) to determine if you are allowed and capable to perform such tasks. www.starVmax.com cannot be held responsible for any incidents or injuries as a result of any modifications described here.
The descriptions provided in here are for entertainment purposes only. www.starVmax.com does not endorse nor recommend do-it-yourself modifications.
Use your own judgement and check with local authorities (e.g. DMV) to determine if you are allowed and capable to perform such tasks. www.starVmax.com cannot be held responsible for any incidents or injuries as a result of any modifications described here.
|
TOPIC: Speed Input for PCV or Speedo Healer
Speed Input for PCV or Speedo Healer 1 year 4 weeks ago #1
|
There has been some interest by some in running the speed input (ABS signal) into the PCV for gear dependent settings on the Quickshifter. This wire can also be used to tie into a Speedo Healer, or for gear dependent maps.
If connecting to the PCV you can use a "positap" to tap into the wire,and run that wire to terminal #5 on the PCV. You then need to set it up in the PCV software. I have taken a diagram I found elswhere on the forum and modified it so that it is a little more intuitive (to me anyway). It is a white wire with yellow striping. This diagram shows the LARGE ECU connector AS YOU LOOK AT THE CONNECTOR WHERE THE WIRES EXIT, AND WHERE YOU WILL CONNECT.  |
|
|
Mark B
"The Future Is Unwritten" |
Re: Speed Input for PCV or Speedo Healer 1 year 4 weeks ago #2
|
Yeah, and be sure not to confuse it for the Yellow wire with white striping, like I did when wiring the speed healer (not good)
 Me be partially color blind, and did not even see the correct wire until unplugging the connector completely and flipping it upside down...  (if severed, the other wire make Vmax NO GO) Live and learn, I guess. |
|
|
|
|