Yamaha Star V-Max Forum :: Topic: Hindle / Brock Evo can for the 4-1 system (4/5)

Welcome, Guest

TOPIC: Hindle / Brock Evo can for the 4-1 system

Re: Hindle / Brock Evo can for the 4-1 system 1 year 1 day ago #31

hindle.com/distributors.html	itgoes NOW ONLINE Platinum Max Posts: 4885 Thank you received: 2341
Mark B "The Future Is Unwritten" The administrator has disabled public write access. The following user(s) said Thank You: greenslime, No_Max

Re: Hindle / Brock Evo can for the 4-1 system 1 year 1 day ago #32

Thanks Mark, that's good information. You guys got a distributor right in N.Y. and Kris has choices in Australia!	No_Max NOW ONLINE Platinum Max Posts: 2623 Thank you received: 2057
Lean & Mean it in every corner of your life... If it wasn't for us the fast lane would rust... V4'S are music to the seat of my pants... Get your V-Max ECU Re-Flashed to Full Power! The administrator has disabled public write access.

Re: Hindle / Brock Evo can for the 4-1 system 1 year 1 day ago #33

The Gen 4 in CF or Ti only has 2- two 1-2 Rivits on each end and and with billet end caps their is plenty of meat
for more I was going to drill and tap some low profiile button head allen's but ended up with the Evo they have 6-six Rivits on each end and now have banded it for even more support mine is rock solid with the stainless mid pipe bolt mount
2 very stretched springs and the Band doubt i will have troubles with this one at least i hope not I really think it's the best
I have had so far , I have not tried it at the strip yet usually opt for Jr meg but am curious just the same it sure sounds good
and the street performance is at least as good as the G 4 as like you mentioned basically the same as that but does have a
Distinct "V" on the exhaust exit where as the G4 has the round spout and the V is a good thing ,

Think Brock has a lock on the Gen 2 4-1 stuff not sure if another vendor will have the G 4 midpipe at least that is the way
i understand that , Hindle does not sell a 4-1 system for the Gen 2 just the dual system that Mark just purchased in fact
he is the Mule system am i right right Mark?

Greg did you have the G4 prior to the Evo ?

capt bob
OFFLINE
Platinum Max
Posts: 4079
Thank you received: 1718

The administrator has disabled public write access.

Re: Hindle / Brock Evo can for the 4-1 system 1 year 1 day ago #34

Thanks for stating the obvious guys! I checked that a week ago.

There is no point in me going through the Australian distributor as they are just the middle man
They will have no clue what a Vmax is and not carry anything for it which means I will have to wait for them to get it before they send it to me and pay shipping twice and pay a middle man premium on top of it all for no added value.

Given I am a Brock's customer and have bought their system I would expect that I can buy the alternative elbow/adopter that will allow me to fit other cans like the Brock's Gen4/Evo etc ... with their 4-1 system

Bob, please ask Jeff what is the art of the possible here. If they don't want to offer the whole setup as an upgrade option, I am happy to just buy the adapter from Brock's so I can source alternative can options

VmaxOZ
OFFLINE
Platinum Max
Posts: 2280
Thank you received: 1270

The administrator has disabled public write access.

Re: Hindle / Brock Evo can for the 4-1 system 1 year 1 day ago #35

	connolly1 OFFLINE Senior Max Posts: 172 Thank you received: 42
The administrator has disabled public write access.

Re: Hindle / Brock Evo can for the 4-1 system 1 year 1 day ago #36

Roger Wilco know he will sell the Midpipe by itself trying to get it with the can to keep the price down that was a good price for a Black one wonder what the CF ones will bring ? He is back on Wed.	capt bob OFFLINE Platinum Max Posts: 4079 Thank you received: 1718
The administrator has disabled public write access.

Re: Hindle / Brock Evo can for the 4-1 system 1 year 1 day ago #37

Just call EJ or Steve at Brock's and they will get you the Gen4 elbow you need to mount the Evo can.

VmaxOZ wrote:

Thanks for stating the obvious guys! I checked that a week ago.

There is no point in me going through the Australian distributor as they are just the middle man
They will have no clue what a Vmax is and not carry anything for it which means I will have to wait for them to get it before they send it to me and pay shipping twice and pay a middle man premium on top of it all for no added value.

Given I am a Brock's customer and have bought their system I would expect that I can buy the alternative elbow/adopter that will allow me to fit other cans like the Brock's Gen4/Evo etc ... with their 4-1 system

Bob, please ask Jeff what is the art of the possible here. If they don't want to offer the whole setup as an upgrade option, I am happy to just buy the adapter from Brock's so I can source alternative can options

TB21
OFFLINE
Gold Max
Posts: 1164
Thank you received: 274

The administrator has disabled public write access.

The following user(s) said Thank You: VmaxOZ, greenslime, capt bob

Re: Hindle / Brock Evo can for the 4-1 system 1 year 1 day ago #38

greenslime wrote:

capt bob wrote:

Darren what Can did he have on before that do you remember ? Just curious about what mid pipe he used trying to get
Brock to hook up some of the boys that have the Short meg now but the elbow is not quite enough need more like the full size can midpipe I had the gen 4 and it was perfect do you have any pics of Greg's bike ? just curious I am covered but some are not yet at least.
Dont know if he needs one or not but i could put him onto my bracket that holds the band it really keeps the can stationary

Thanks Bob

Greg if you would like one of the brackets i make for the band let me know i will whittle you one up.

capt bob
OFFLINE
Platinum Max
Posts: 4079
Thank you received: 1718

The administrator has disabled public write access.

The following user(s) said Thank You: greenslime

Re: Hindle / Brock Evo can for the 4-1 system 1 year 1 day ago #39

capt bob wrote:

The Gen 4 in CF or Ti only has 2- two 1-2 Rivits on each end and and with billet end caps their is plenty of meat
for more I was going to drill and tap some low profiile button head allen's but ended up with the Evo they have 6-six Rivits on each end and now have banded it for even more support mine is rock solid with the stainless mid pipe bolt mount
2 very stretched springs and the Band doubt i will have troubles with this one at least i hope not I really think it's the best
I have had so far , I have not tried it at the strip yet usually opt for Jr meg but am curious just the same it sure sounds good
and the street performance is at least as good as the G 4 as like you mentioned basically the same as that but does have a
Distinct "V" on the exhaust exit where as the G4 has the round spout and the V is a good thing ,

Think Brock has a lock on the Gen 2 4-1 stuff not sure if another vendor will have the G 4 midpipe at least that is the way
i understand that , Hindle does not sell a 4-1 system for the Gen 2 just the dual system that Mark just purchased in fact
he is the Mule system am i right right Mark?

Greg did you have the G4 prior to the Evo ?

yes

greenslime
OFFLINE
Expert Max
Posts: 691
Thank you received: 274

The administrator has disabled public write access.

Re: Hindle / Brock Evo can for the 4-1 system 1 year 1 day ago #40

capt bob wrote:

The Gen 4 in CF or Ti only has 2- two 1-2 Rivits on each end and and with billet end caps their is plenty of meat
for more I was going to drill and tap some low profiile button head allen's but ended up with the Evo they have 6-six Rivits on each end and now have banded it for even more support mine is rock solid with the stainless mid pipe bolt mount
2 very stretched springs and the Band doubt i will have troubles with this one at least i hope not I really think it's the best
I have had so far , I have not tried it at the strip yet usually opt for Jr meg but am curious just the same it sure sounds good
and the street performance is at least as good as the G 4 as like you mentioned basically the same as that but does have a
Distinct "V" on the exhaust exit where as the G4 has the round spout and the V is a good thing ,

Think Brock has a lock on the Gen 2 4-1 stuff not sure if another vendor will have the G 4 midpipe at least that is the way
i understand that , Hindle does not sell a 4-1 system for the Gen 2 just the dual system that Mark just purchased in fact
he is the Mule system am i right right Mark?

Greg did you have the G4 prior to the Evo ?

Yes EEE AHH!

The 4-2-1 is in the Hindle catalog as well. The problem as I see it is ths Brocks has
not totaly embrcaced the entire Brock product line....I think he'd much rather sell what's in his own catalog....IMO. I think they may be considering taking on more Hindle stuff (thats what I was told) so I would encourage them to do it.