|
Welcome,
Guest
|
Disclaimer: Any modification made to your motorcycle can potentially void your factory warranty and conflict with local and federal laws. Any such changes should be performed by an experienced and licensed mechanic.
The descriptions provided in here are for entertainment purposes only. www.starVmax.com does not endorse nor recommend do-it-yourself modifications.
Use your own judgement and check with local authorities (e.g. DMV) to determine if you are allowed and capable to perform such tasks. www.starVmax.com cannot be held responsible for any incidents or injuries as a result of any modifications described here.
The descriptions provided in here are for entertainment purposes only. www.starVmax.com does not endorse nor recommend do-it-yourself modifications.
Use your own judgement and check with local authorities (e.g. DMV) to determine if you are allowed and capable to perform such tasks. www.starVmax.com cannot be held responsible for any incidents or injuries as a result of any modifications described here.
TOPIC: Hindle / Brock Evo can for the 4-1 system
Re: Hindle / Brock Evo can for the 4-1 system 11 months 4 weeks ago #41
|
capt bob wrote:
greenslime wrote:
capt bob wrote: Darren what Can did he have on before that do you remember ? Just curious about what mid pipe he used trying to get Brock to hook up some of the boys that have the Short meg now but the elbow is not quite enough need more like the full size can midpipe I had the gen 4 and it was perfect do you have any pics of Greg's bike ? just curious I am covered but some are not yet at least. Dont know if he needs one or not but i could put him onto my bracket that holds the band it really keeps the can stationary Thanks Bob Greg if you would like one of the brackets i make for the band let me know i will whittle you one up. thanks bob,i'll send you a pm in the morning. |
|
|
The administrator has disabled public write access.
|
Re: Hindle / Brock Evo can for the 4-1 system 11 months 4 weeks ago #42
|
capt bob wrote:
The Gen 4 in CF or Ti only has 2- two 1-2 Rivits on each end and and with billet end caps their is plenty of meat for more I was going to drill and tap some low profiile button head allen's but ended up with the Evo they have 6-six Rivits on each end and now have banded it for even more support mine is rock solid with the stainless mid pipe bolt mount 2 very stretched springs and the Band doubt i will have troubles with this one at least i hope not I really think it's the best I have had so far , I have not tried it at the strip yet usually opt for Jr meg but am curious just the same it sure sounds good and the street performance is at least as good as the G 4 as like you mentioned basically the same as that but does have a Distinct "V" on the exhaust exit where as the G4 has the round spout and the V is a good thing , Think Brock has a lock on the Gen 2 4-1 stuff not sure if another vendor will have the G 4 midpipe at least that is the way i understand that , Hindle does not sell a 4-1 system for the Gen 2 just the dual system that Mark just purchased in fact he is the Mule system am i right right Mark? Greg did you have the G4 prior to the Evo ? brocks only has a lock on the 4-1 system in the U.S.,it's sold everywhere else under the hindle banner. |
|
|
The administrator has disabled public write access.
|
Re: Hindle / Brock Evo can for the 4-1 system 11 months 3 weeks ago #43
|
|
|
|
Mark B
"The Future Is Unwritten"
Last Edit: 11 months 3 weeks ago by itgoes.
The administrator has disabled public write access.
|
Re: Hindle / Brock Evo can for the 4-1 system 11 months 3 weeks ago #44
|
itgoes wrote:
the whole brock/hindle thing does seem to confuse alot of people,there was no drama for me as i really don't care what name is on the can since they ultimately come frome the same place,but i prefer the evo can and brocks did not offer the evo at the time i purchesed my pipe so i went elsewhere for my evo can. from what i understand now is that brocks will order other hindle cans that he does not stock if that is what you want. |
|
|
The administrator has disabled public write access.
|
Time to create page: 0.090 seconds

