Thursday June 20 , 2013
Text Size
   
Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username? Create an account
Disclaimer: Any modification made to your motorcycle can potentially void your factory warranty and conflict with local and federal laws. Any such changes should be performed by an experienced and licensed mechanic.
The descriptions provided in here are for entertainment purposes only. www.starVmax.com does not endorse nor recommend do-it-yourself modifications.
Use your own judgement and check with local authorities (e.g. DMV) to determine if you are allowed and capable to perform such tasks. www.starVmax.com cannot be held responsible for any incidents or injuries as a result of any modifications described here.
  • Page:
  • 1
  • 2

TOPIC: What parts are needed to put 200 rim back in use?

What parts are needed to put 200 rim back in use? 10 months 2 weeks ago #1

OK, I realize this is a question asked out of pure laziness on my part. I have the wheel here and a parts manual.....but, I was thinking someone might have this off the top of their head or maybe written down somwhere.

I want to make the 200 rim I have complete again after switching the parts needed over to my 240 rim several years ago.

Anybody know what they are without going through the trouble of looking them up?

Thanks,

Mark
  • itgoes
  • itgoes's Avatar
  • OFFLINE
  • Platinum Max
  • Posts: 4966
  • Thank you received: 2404
Mark B

"The Future Is Unwritten"
The administrator has disabled public write access.

Re: What parts are needed to put 200 rim back in use? 10 months 2 weeks ago #2

I can't remember who made this video but it was a huge help for me.
  • gbrown
  • gbrown's Avatar
  • OFFLINE
  • Expert Max
  • Posts: 654
  • Thank you received: 138
The administrator has disabled public write access.
The following user(s) said Thank You: VMaxChuck, cvvmax

Re: What parts are needed to put 200 rim back in use? 10 months 2 weeks ago #3

That's Joey......I forgot about that video, thanks!

And thank you Joey!
  • itgoes
  • itgoes's Avatar
  • OFFLINE
  • Platinum Max
  • Posts: 4966
  • Thank you received: 2404
Mark B

"The Future Is Unwritten"
The administrator has disabled public write access.

Re: What parts are needed to put 200 rim back in use? 10 months 2 weeks ago #4

:smash: a twohundie's not complete wthout a 011 :laugh:
  • Qtip
  • Qtip's Avatar
  • OFFLINE
  • Platinum Max
  • What ever!
  • Posts: 6263
  • Thank you received: 1707
I'm right here..REALLY!!
The administrator has disabled public write access.

Re: What parts are needed to put 200 rim back in use? 10 months 2 weeks ago #5

itgoes wrote:
That's Joey......I forgot about that video, thanks!

And thank you Joey!

Mark,
Thanks to Joey, that YouTube video is a great guide...

I don't know if your intention was to move all the parts that you originally moved from your 200mm to the 240mm back onto the OEM 200mm rim or to purchase all the necessary parts for the 200mm, so as to make it readily available for use instead of the 240mm, depending on the particular usage of either rim...

A couple years ago, when Mark (Merced) wanted to outfit some spare 200mm rims, so that he could quickly change them out while he had new tires put onto the worn out ones, we came up with a parts list as shown below...

A couple of things that are not outlined in the above YouTube video, are the bearings, collars and seals...

The list below is assuming that you left the one bearing in place on the OEM 200mm rim when you built up the 240mm rim and you still have the longer collar...in addition, Ref. No. 3 (Adjusting Nut) and 4 (Oil Seal) may have been reused or retained, depending on what you did at the time...some folks moved them and others purchased new ones...

Anyway...just thought that you could use the list to help you...

Art

Ref.No. - Description - PN - (Qty Needed) - Price per unit - (Additional Info, if applicable)

2 BEARING  93306-07809-00 (1ea) $24.38/ea (Should still be on the 200mm Rim)
5 SPACER, BEARING  2S3-25317-00-00 (1ea) $14.31/ea (Should still be on the 200mm Rim)
21 RING, WHEEL 2  2S3-2515A-00-00 (1ea) $127.81/ea (Should still be on the 200mm Rim)
22 RING, WHEEL 1  2S3-2514A-00-00 (1ea) $16.02/ea (Should still be on the 200mm Rim)
23 BOLT,FLANGE  95817-06016-00 (5ea) $1.05/ea (Should still be on the 200mm Rim)

3 NUT, ADJUSTING 3P6-2538E-00-00 (1ea) $22.29/ea (May still be on the 200mm Rim, if you did nor use on the 240mm)
4 OIL SEAL 93106-40013-00 (1ea) $4.80/ea (May still be on the 200mm Rim, if you did nor use on the 240mm)

6 BEARING  93317-43580-00 (1ea) $21.27/ea
7 COLLAR, WHEEL  2S3-25377-00-00 (1ea) $18.90/ea
8 O-RING  93210-47675-00 (1ea) $2.31/ea
9 ROTOR, SENSOR  2S3-2517G-00-00 (1ea) $18.09/ea
10 SCREW 90149-05010-00 (5ea) $1.17/ea
11 CLUTCH, HUB  2S3-25366-00-00 (1ea) $143.44/ea
12 BEARING  93306-07808-00 (1ea) $24.38/ea
13 COVER, PLATE  2S3-25327-00-00 (1ea) $12.01/ea
14 BOLT, BUTTON HEAD 92014-05008-00 (3ea) $1.18/ea
15 DAMPER  2S3-25364-00-00 (6ea) $7.51/ea
16 STOPPER, HUB  2S3-25318-00-00 (1ea) $45.37/ea
20 SEAL, HUB DUST  2S3-25319-00-00 (1ea) $8.55/ea

Note: All prices are from the current partshark.com fiche...
  • cvvmax
  • cvvmax's Avatar
  • OFFLINE
  • Vendor
  • Posts: 2809
  • Thank you received: 1424
The administrator has disabled public write access.
The following user(s) said Thank You: VMaxChuck, itgoes, skullmax, VMAXD

Re: What parts are needed to put 200 rim back in use? 10 months 2 weeks ago #6

Thanks very much Art.

I have not decided whether or not I want to keep both....I probably will so this list saves me mucho work. It's exactly what my lazy butt was hoping for! :)
  • itgoes
  • itgoes's Avatar
  • OFFLINE
  • Platinum Max
  • Posts: 4966
  • Thank you received: 2404
Mark B

"The Future Is Unwritten"
The administrator has disabled public write access.

Re: What parts are needed to put 200 rim back in use? 10 months 2 weeks ago #7

Qtip wrote:
:smash: a twohundie's not complete wthout a 011 :laugh:

Of course! Wait until I run through the Dragon in the fall on a 200!! :dancing:
  • itgoes
  • itgoes's Avatar
  • OFFLINE
  • Platinum Max
  • Posts: 4966
  • Thank you received: 2404
Mark B

"The Future Is Unwritten"
Last Edit: 10 months 2 weeks ago by itgoes.
The administrator has disabled public write access.
The following user(s) said Thank You: Qtip

Re: What parts are needed to put 200 rim back in use? 10 months 2 weeks ago #8

Wow! $550 approx. to enable the second wheel on standby? That's almost as much as the 240 wheel itself. not sure its worth it unless you swap them out a lot.

While on the subject, does anyone have an easy way to torque the 4 pumpkin bolts to the swing arm with a 240?
I always struggle with space especially the two inside bolts being too close to the wheel and can't seem to get my wrench in there so easily
  • VmaxOZ
  • VmaxOZ's Avatar
  • NOW ONLINE
  • Platinum Max
  • Posts: 2335
  • Thank you received: 1371
The administrator has disabled public write access.

Re: What parts are needed to put 200 rim back in use? 10 months 2 weeks ago #9

Mark, if u decide to part with the 240, i would like to buy it from u.
  • damnbiker
  • damnbiker's Avatar
  • OFFLINE
  • Junior Max
  • Posts: 64
  • Thank you received: 48
The administrator has disabled public write access.

Re: What parts are needed to put 200 rim back in use? 10 months 2 weeks ago #10

Mark, Sent you a pm, go ahead & swap it with another forum member as I'm trying to go in another direction. Thanks, Dale
  • dcobbx4
  • dcobbx4's Avatar
  • OFFLINE
  • Fresh Max
  • Posts: 37
  • Thank you received: 12
The administrator has disabled public write access.
  • Page:
  • 1
  • 2
Time to create page: 0.106 seconds

My Account

Sign in with Facebook