Recent Topics The latest Discussions
New Topic Start a new discussion
Cool
(1 viewing) (1) Guest
Disclaimer: Any modification made to your motorcycle can potentially void your factory warranty and conflict with local and federal laws. Any such changes should be performed by an experienced and licensed mechanic.
The descriptions provided in here are for entertainment purposes only. www.starVmax.com does not endorse nor recommend do-it-yourself modifications.
Use your own judgement and check with local authorities (e.g. DMV) to determine if you are allowed and capable to perform such tasks. www.starVmax.com cannot be held responsible for any incidents or injuries as a result of any modifications described here.
The descriptions provided in here are for entertainment purposes only. www.starVmax.com does not endorse nor recommend do-it-yourself modifications.
Use your own judgement and check with local authorities (e.g. DMV) to determine if you are allowed and capable to perform such tasks. www.starVmax.com cannot be held responsible for any incidents or injuries as a result of any modifications described here.
|
TOPIC: Cool
Cool 3 years, 3 months ago #1
|
This looks like a good vmax lid when rolling on that beast burner on baby
 |
|
|
|
Re:Cool 3 years, 3 months ago #2
|
Yes, i had been searching for a deal on Akuma helmets, but I found out a few things. The helmet is made by a chinese company that made the Veemar line of helmets. That importer quit importing the Veemar and someone else decided to pickup the contract and renamed the line to Akuma, with a few small changes and the after burner lights. Now for the shocking part, while doing research on helmets in general, I visited the DOT site and was shocked to learn that upon random testing of helmets on the market today, the Akuma F-14 failed impact tests. Read it your self at the DOT site from 2007. It's not ALL about looks when you're on the most powerful production bike built
 |
|
|
Lean & Mean it in every corner of your life...
If it wasn't for us the fast lane would rust... V4'S are music to the seat of my pants... Get your V-Max ECU Re-Flashed to Full Power! |
Re:Cool 3 years, 3 months ago #3
|
What he said
 |
|
 |
Re:Cool 3 years, 3 months ago #4
|
Can't be very difficult to make such an afterburner setup for virtually any helmet out there. Sure would look good!
 |
|
|
<strong>"It's time to Ride - This is Vmax."</strong>
|
Re:Cool 3 years, 3 months ago #5
|
Especially with this little gizmo
|
|
|
Lean & Mean it in every corner of your life...
If it wasn't for us the fast lane would rust... V4'S are music to the seat of my pants... Get your V-Max ECU Re-Flashed to Full Power! |
Re:Cool 3 years, 3 months ago #6
|
Bad_Max wrote:
Yes, i had been searching for a deal on Akuma helmets, but I found out a few things. The helmet is made by a chinese company that made the Veemar line of helmets. That importer quit importing the Veemar and someone else decided to pickup the contract and renamed the line to Akuma, with a few small changes and the after burner lights. Now for the shocking part, while doing research on helmets in general, I visited the DOT site and was shocked to learn that upon random testing of helmets on the market today, the Akuma F-14 failed impact tests. Read it your self at the DOT site from 2007. It's not ALL about looks when you're on the most powerful production bike built You are right BM i thought it looked cool. I am looking at a HJC FS 15 for max i hope it passed.. |
|
|
|
Re:Cool 3 years, 3 months ago #7
|
Yes, HJC a Korean firm, makes a quality product. They do so under many names. Joe Rocket & Icon are just a few. Checkout the RKT-101 as I believe they're the same helmet. You can usualy find a deal on them.
|
|
|
Lean & Mean it in every corner of your life...
If it wasn't for us the fast lane would rust... V4'S are music to the seat of my pants... Get your V-Max ECU Re-Flashed to Full Power! |
|