Monday April 21 , 2014
Text Size
   
Welcome, Guest
Username: Password: Remember me
Disclaimer: Any modification made to your motorcycle can potentially void your factory warranty and conflict with local and federal laws. Any such changes should be performed by an experienced and licensed mechanic.
The descriptions provided in here are for entertainment purposes only. www.starVmax.com does not endorse nor recommend do-it-yourself modifications.
Use your own judgement and check with local authorities (e.g. DMV) to determine if you are allowed and capable to perform such tasks. www.starVmax.com cannot be held responsible for any incidents or injuries as a result of any modifications described here.
  • Page:
  • 1
  • 2

TOPIC: Frame Braces.....

Re:Frame Braces..... 5 years 10 months ago #11

Here is what they look like. The powdercoating is a metallic silver with a clear coat.
The administrator has disabled public write access.

Re:Frame Braces..... 5 years 10 months ago #12

Wouldn't take it as a image.
The administrator has disabled public write access.

Re:Frame Braces..... 5 years 10 months ago #13

This is the last try, had to dumb down the camera.
vmax_frame_braces_012.jpg
The administrator has disabled public write access.

Re:Frame Braces..... 5 years 10 months ago #14

You probably have to resize the picture. The forums wont take them if they are too big.
SDPEARLY
  • SDPEARLY
  • SDPEARLY's Avatar
  • OFFLINE
  • Gold Max
  • Posts: 1838
  • Thank you received: 10
The administrator has disabled public write access.

Re:Frame Braces..... 5 years 10 months ago #15

Left side.
vmax_frame_braces_015.jpg
The administrator has disabled public write access.

Re:Frame Braces..... 5 years 10 months ago #16

rixter66 wrote:
Wouldn't take it as a image.

The image might be too big. The forum only allows for 2000x2000 pix and 1MB of file size or less.
You can email me the image to This email address is being protected from spambots. You need JavaScript enabled to view it. and I can put it up for you.
  • fxstein
  • fxstein's Avatar
  • OFFLINE
  • Moderator
  • Time to Ride! This is VMax!
  • Posts: 6342
  • Thank you received: 457
"It's time to Ride - This is Vmax."
The administrator has disabled public write access.

Re:Frame Braces..... 5 years 10 months ago #17

Those are some great looking braces Rixter. Clean and simple. Good job.
SDPEARLY
  • SDPEARLY
  • SDPEARLY's Avatar
  • OFFLINE
  • Gold Max
  • Posts: 1838
  • Thank you received: 10
The administrator has disabled public write access.

Re:Frame Braces..... 5 years 10 months ago #18

Have you guys considered ordering from outside the US, I got mine from Germany and found them to be quite reasonable. If your using ebay select worldwide while your searching, its suprising what you find.
The administrator has disabled public write access.

Re:Frame Braces..... 5 years 10 months ago #19

I've got mine from UK. www.exactrep.com I found them cool looking and seems like they do the job with flexibility of the frame.Not on the 100%, but when I put the aluminium solid engine mountings and aliminium swing arm pivot adjusters, I think it will ready for launch on Hi speed without any disturbance .

Attachments:
  • voltage
  • voltage's Avatar
  • OFFLINE
  • Fresh Max
  • Posts: 9
_________________________________________
When I'm on the road,no one can stop me !
Last Edit: 5 years 10 months ago by voltage.
The administrator has disabled public write access.

Re:Frame Braces..... 5 years 10 months ago #20

Thanks for the info,and yes I've looked accross the Pond, but with the exchange and shipping, not really worth while. (those polished braces from Exactrep would cost me in the $400 range to get it here to the US)
You do make/have nicer stuff for the Max than we do, I would love to get my mitts on a set of those knee guards on your trike though.

Nice rides...both of you....Shaggy/voltage
Chris
  • Cruzin
  • Cruzin's Avatar
  • OFFLINE
  • Senior Max
  • Posts: 368
  • Thank you received: 1
The administrator has disabled public write access.
  • Page:
  • 1
  • 2
Time to create page: 0.107 seconds

My Account

Sign in with Facebook