Yamaha Star V-Max Forum :: Topic: Checking in on the Dyno (2/2)

Welcome, Guest

TOPIC: Checking in on the Dyno

Re: Checking in on the Dyno 1 year 2 months ago #11

hammer wrote:

Jack_Mitchell wrote:

I'll load the original Bridgestone Battlax 200 on for the next Dyno pull sometime this summer.
Thanks for the feedback Hammer, I read somewhere on the forum that the wide wheel drops about six hp which would put our bikes on about the same level. Could you post your printout on this thread so that we can do a comparison?
Kudos to Tim Nash for breathing some fire into the Max - just look at that torque curve :thumbsup:

Best Regards, Jack

I can't find the lowest one. Here is one that compaired before and after ECU re-flash.

Why is your redline so low?

jbretthorton
NOW ONLINE
Platinum Max
Posts: 2177
Thank you received: 1014

The administrator has disabled public write access.

Re: Checking in on the Dyno 1 year 2 months ago #12

The speed limiter was set at 150mph with this version.	hammer OFFLINE Platinum Max Posts: 2894 Thank you received: 1104
The administrator has disabled public write access.

Re: Checking in on the Dyno 1 year 2 months ago #13

Hi Tim,

Any chance the guy that pulled 196HP could state his setup with dyno in a similar way as I did at the beginning of this thread?
I’m not really concerned about the AFR running a tad rich at 6300rpm bump (forth gear) since I intend to be one of your first orders once the Vroomy is ready to market.
Racers Choice went out of business so dynoing there is not possible.
CyclePro’s owner is Craig Mark (160lbs) also a professional racer, he’s offered to pilot the Max down the quarter at Cayuga next month.

Jack_Mitchell
NOW ONLINE
Senior Max
Posts: 218
Thank you received: 82

The administrator has disabled public write access.

Re: Checking in on the Dyno 1 year 2 months ago #14

VMaxGuru wrote: Jack, ... I have figured out how to read and write live data to the ECU now... WOW, Congrats Tim, you never cease to amaze me with all you achieve. That's one big Step leading into much more refined Results in a less expensive Way and a lot less time consuming Process. IMPRESSIVE !!! CONGRATS again	Squeeze OFFLINE Platinum Max Posts: 2471 Thank you received: 445
The administrator has disabled public write access. The following user(s) said Thank You: Power Slave

Re: Checking in on the Dyno 1 year 3 weeks ago #15

I had mine done recently... pure stock. This a 2011 with about 5200 miles on it. I was told dyno's vary a little, and some vary alot, is this true? Thought this was a good run. They ran it twice in a row and got almost identical results. www.misterdan.com/dynovmax.jpg Dan	pilot55060 OFFLINE Fresh Max Posts: 6 Thank you received: 1
Last Edit: 1 year 3 weeks ago by pilot55060. The administrator has disabled public write access.